DIY Watering System : Homemade Recycled Soda can watering System

Irrigation or water system is highly needed for each plant, especially, when we don’t get proper time for watering our plants or garden trees. There are several gardeners, who won’t agree with this theory, as they claim that watering garden plant is one of their daily jobs. But what if they need to leave their house for any reason for 1 or 2 days?

Well, watering plants are required as daily routine; whether your plants are tiny or big, and you just can’t keep them dehydrate because you are not around there! Probably that’s why this irrigation procedure has come across in our mind, which claims very few steps to run properly. Here we are referring irrigation or watering system in an inexpensive way by using recycling soda can check this out-

How to Recycle Old Soda Can for Container Plants Watering System

BeFunky Collage


Step 1:

At first, take out the plastic border from the opening section with the help of a screwdriver.

Step 2:

In the next step, cut out the bottom of your soda can with a scissor or sharp knife and take it out.

Step 3:

Now, take a plastic made thick watering tube or pipe, which have a length of 18 to 20 inches, set the pipe on a drill holder, and make the hole bigger of that tube with a drill machine

Step 4:

After that, carefully set the mouth of your bottle with the tube by attaching the bottle to that hole.

Step 5:

Press the bottle from the top forcefully so then, you can insert the more of the bottle into that pipe and there won’t be any room for leaking water!

Step 6:

Now, set the watering system in the middle of your tub or plant pot.

Step 7:

Finally, fill the bottle with water and your irrigation system is set to work in which your plant will get a slow yet steady watering for a certain period!

For a more apparent idea, you can check this video instead. Take a look-

Soda Bottle Watering System

Leave a Reply

Your email address will not be published.